Explosion-proof pressure transmitter

• 

The ZW3351GP series explosion-proof pressure transmitter adopts imported high-quality pressure senso…

I. Product Overview:

The ZW3351GP series explosion-proof pressure transmitter adopts imported high-quality pressure sensor chip. The environment temperature, pressure and input/output characteristic of the sensor are corrected by the built-in memory E2PROM. The temperature is compensated automatically by CPU microprocessor operation. The non-linear correction, V/I conversion and A/D conversion are carried out. The standard signal of 4-20mA is output, and an H-conforming standard signal is superimposed on the analog signal. ART protocol communicates with digital signals. In communication, the frequency signal has no disturbance effect on the signal of 4-20mA.

II. Working Principle:

The principle of ZW3351GP series explosion-proof pressure transmitter is that two kinds of pressure of measured medium enter into high and low pressure chambers, which act on the isolation diaphragm on both sides of the element (i.e. sensitive element), and transmit to both sides of the measuring diaphragm through the isolation diaphragm and the filling liquid in the element. Pressure transmitter is a capacitor composed of measuring diaphragm and electrodes on both sides of insulating sheet. When the pressure on both sides is inconsistent, the displacement of the diaphragm is proportional to the pressure difference, so the capacitance on both sides is different, and the signal is converted into a signal proportional to the pressure through oscillation and demodulation.

3. Application occasions:

ZW3351GP series explosion-proof pressure transmitter is mainly used to measure the pressure, negative pressure and adiabatic pressure of gas, liquid and steam, and then convert it into 4-20mA.DC signal output. It can measure the absolute pressure of exhaust system, distillation tower, evaporator and crystallizer.

Fourth, main characteristics:

1. Super measurement performance for pressure, differential pressure, liquid level and flow measurement;

2. Digital accuracy: +(-) 0.05%;

3. Stability: 0.25% for 60 months;

4. Range ratio: 100:1;

5. Measurement rate: 0.2S;

6. Miniaturized (2.4kg) stainless steel flange, easy to install;

7. Process connection is compatible with other products to realize measurement.

8. The sensor (technology) with H-alloy sheath has achieved excellent cold and thermal stability.

9. Intelligent transmitter with 16-bit computer;

10. Standard 4-20mA, with HART-based digital signal, remote control supports upgrading to fieldbus and field control technology.

Technical parameters:

1. Targets: liquids, gases and vapors;

2. Measurement range: 0-0.08kPa to 0-40 MPa;

3. Output signal: 4-20mA DC (special for four-wire system); 220V AC power supply, 0-10mA DC output;

4. Power supply: 12-45V DC, generally 24V DC;

5. Load characteristics: related to power supply, with load capacity at a certain power supply voltage; the relationship between load impedance RL and power supply voltage Vs is: RL < 50 (Vs-12);

6. Indicator table: pointer linear indicator 0-100% calibration and LCD liquid crystal display;

7. Explosion-proof grade: a: Exd II BT5 or Exd II CT6; b: intrinsically safe type (Exia II CT6 or Ex IB II CT6);

8. Range and Zero: External continuous adjustable;

9. Positive and negative migration: After positive or negative migration of zeros, the upper and lower limits of measurement range and measurement range can not exceed 100% of the upper limit of measurement range. The positive and negative migration of Zui is 500% of the calibration range of Zui minor adjustment, and the negative migration of Zui is 600% of the calibration range of Zui minor adjustment.

10. Temperature Range: Working Temperature Range: - 20 ~+88 C.